David Bauer Physics & Astronomy · UCLA

You’ll be able to:

  • multiply and divide numbers in scientific notation, and convert between SI prefixes from giga to nano,
  • estimate the order of magnitude of an answer before you calculate it,
  • enter powers of ten and fractions into your calculator so that it calculates what you intend,
  • check whether your calculator is in degree mode or radian mode.

Check yourself first

Answer these two questions without notes. If you’re not sure, it’s ok to answer “I don’t know yet” rather than guessing.

1. Write the result in scientific notation:

\[\frac{(1.5 \times 10^{4})(4.0 \times 10^{-7})}{8.0 \times 10^{-5}}\]

2. Ashley needs $\sin 30^\circ$ to find a component of a force. She types sin(30) into her calculator, and it shows $-0.988$. What went wrong?

Answers to the entry check
  1. $7.5 \times 10^{1}$, which is $75$.
  2. Her calculator is in radian mode, so it found the sine of 30 radians. In degree mode, $\sin 30^\circ = 0.500$.

Both right? Skip ahead and take the N1 mastery check in Canvas. Either one wrong, or unsure? Keep reading. The idea section has a step-by-step solution to question 1 and explains question 2 in the section on calculators.

Where this shows up in the 5 Series

  • 5A, elasticity. A tendon stretches by $s = \frac{FL_0}{YA}$, where the Young’s modulus $Y$ is about $1.2\ \mathrm{GPa}$.
  • 5B, oscillations. In simple harmonic motion, $x(t) = A\cos(\omega t + \phi_0)$, the phase is in radians, so your calculator has to be in radian mode.
  • 5C, electric force. Coulomb’s law, $F_E = k\frac{\lvert q_1 q_2 \rvert}{r^2}$, uses $k = 9.0 \times 10^{9}\ \mathrm{N\cdot m^2/C^2}$ and charges measured in nanocoulombs.
  • 5C, light. A photon of visible light, with a wavelength of a few hundred nanometers, has an energy $E = \frac{hc}{\lambda}$ that is small multiple of $10^{-19}\ \mathrm{J}$.

The idea

Quick refresher

  • A negative exponent means a reciprocal: $10^{-3} = \frac{1}{10^{3}} = 0.001$.
  • To multiply powers of ten, add the exponents: $10^{a} \times 10^{b} = 10^{a+b}$.
  • To divide powers of ten, subtract the exponent of the denominator: $\frac{10^{a}}{10^{b}} = 10^{a-b}$.
  • To raise a power of ten to a power, multiply the exponents: $(10^{a})^{n} = 10^{an}$.

A number in scientific notation is a leading number between 1 and 10 times a power of ten, like $7.5 \times 10^{1}$. An SI prefix is a name for a power of ten, so $1.2\ \mathrm{GPa}$ means $1.2 \times 10^{9}\ \mathrm{Pa}$. These are the prefixes you will see most often in the 5 Series:

Prefix Symbol Power of ten
giga G $10^{9}$
mega M $10^{6}$
kilo k $10^{3}$
centi c $10^{-2}$
milli m $10^{-3}$
micro μ $10^{-6}$
nano n $10^{-9}$

The key rule for doing calculations with these numbers is

Key rule: replace every prefix with its power of ten. Then multiply or divide the leading numbers and the powers of ten separately.

To calculate by hand, follow these steps:

  1. Replace each prefix with its power of ten.
  2. Multiply or divide the leading numbers.
  3. Combine the powers of ten. Add the exponents in the numerator, and subtract the exponents in the denominator.
  4. Rewrite the result so the leading number is between 1 and 10. If you multiply the leading number by 10, subtract 1 from the exponent. If you divide it by 10, add 1 to the exponent.

Here are the steps on the first question from the entry check. There are no prefixes, so step 1 is already done. The leading numbers give $\frac{(1.5)(4.0)}{8.0} = 0.75$, and the exponents give $4 + (-7) - (-5) = 2$:

\[\frac{(1.5 \times 10^{4})(4.0 \times 10^{-7})}{8.0 \times 10^{-5}} = 0.75 \times 10^{2}\]

Subtracting $-5$ is the same as adding 5. For step 4, multiply the leading number by 10 and subtract 1 from the exponent:

\[0.75 \times 10^{2} = 7.5 \times 10^{1}\]

You can use the same steps to convert the swimming speed of a bacterium from micrometers per second to meters per second:

\[v = 20\ \mu\mathrm{m/s} = 20 \times 10^{-6}\ \mathrm{m/s}\] \[v = 2.0 \times 10^{-5}\ \mathrm{m/s}\]

To convert from meters to a prefixed unit, divide by the power of ten of the prefix: $5.2 \times 10^{-7}\ \mathrm{m} = 520\ \mathrm{nm}$, because $\frac{10^{-7}}{10^{-9}} = 10^{2}$.

When the rule applies. Adding exponents only works when you multiply. To add or subtract numbers in scientific notation, first rewrite them with the same power of ten. For example, write $2.0 \times 10^{3}$ as $0.20 \times 10^{4}$ to add it to $3.0 \times 10^{4}$:

\[3.0 \times 10^{4} + 0.20 \times 10^{4} = 3.2 \times 10^{4}\]

A prefix on a squared or cubed unit, as in $\mathrm{mm^2}$, is squared or cubed along with the unit. These conversions are explored in N2: Units and dimensional analysis.

Estimate first. For the order of magnitude of an answer, round each leading number to 1 if it is below about 3, or to 10 if it is above about 3, and combine the powers of ten. For the first entry-check question, the estimate is $\frac{(10^{4})(10^{-6})}{10^{-4}} = 10^{2}$, which is close to $75$.

Your calculator. You can avoid common calculator errors with three habits.

  • Enter powers of ten with the exponent key, labeled E, EE, EXP, or $\times 10^{x}$. Type $8.0 \times 10^{-5}$ as 8.0E-5, and type $10^{-5}$ as 1E-5, because 10E-5 means $10 \times 10^{-5}$. If your calculator has a separate negative key, (−), use it for a negative exponent.
  • Put parentheses around a whole denominator. For $\frac{FL_0}{YA}$, type F × L0 ÷ (Y × A). Without the parentheses, the calculator divides by $Y$ and then multiplies by $A$.
  • Check the angle mode. The display shows DEG or RAD. Use degree mode for angles in degrees, and radian mode for angles in radians, such as the phase $\omega t + \phi_0$. To test the mode, calculate sin(90). It is 1 in degree mode and 0.894 in radian mode.

In the second entry-check question, the calculator was in radian mode, so sin(30) gave the sine of 30 radians (about $1719^\circ$), which is $-0.988$.

Check every answer three ways.

  • Units. Carry the units through, and confirm that they reduce to the unit of the quantity you want, as in worked example 1.
  • Size. Your answer should be close to your estimate, usually within a factor of 10. A much larger difference usually means a mistake in an exponent or a missing parenthesis.
  • Known values. Test your calculator on something you know. For example, sin(90) should give 1 in degree mode.

Worked examples

Worked example 1: the force between two charges

Problem. Coulomb’s law gives the magnitude of the electric force between two charges $q_1$ and $q_2$ a distance $r$ apart:

\[F_E = k\frac{|q_1 q_2|}{r^2}\]

with $k = 9.0 \times 10^{9}\ \mathrm{N\cdot m^2/C^2}$. Find $F_E$ for $q_1 = 2.0\ \mathrm{nC}$ and $q_2 = 5.0\ \mathrm{nC}$ separated by $r = 3.0\ \mathrm{cm}$.

Replace each prefix with its power of ten: $q_1 = 2.0 \times 10^{-9}\ \mathrm{C}$, $q_2 = 5.0 \times 10^{-9}\ \mathrm{C}$, and $r = 3.0 \times 10^{-2}\ \mathrm{m}$. Squaring the distance multiplies its exponent by 2:

\[r^2 = (3.0 \times 10^{-2}\ \mathrm{m})^2 = 9.0 \times 10^{-4}\ \mathrm{m^2}\]

Multiply and divide the leading numbers, $\frac{(9.0)(2.0)(5.0)}{9.0} = 10$, and combine the exponents, $9 - 9 - 9 - (-4) = -5$. Then rewrite the result so the leading number is between 1 and 10. Dividing the leading number by 10 means adding 1 to the exponent:

\[F_E = 10 \times 10^{-5}\ \mathrm{N} = 1.0 \times 10^{-4}\ \mathrm{N}\]

Check.

  • Calculator: typing 9.0E9 × 2.0E-9 × 5.0E-9 ÷ (3.0E-2)^2 gives $1.0 \times 10^{-4}$.
  • Estimate: rounding each leading number gives $F_E \approx \frac{(10^{10})(10^{-9})(10^{-8})}{10^{-3}} = 10^{-4}\ \mathrm{N}$.
  • Units: $\frac{\mathrm{N\cdot m^2}}{\mathrm{C^2}} \cdot \frac{\mathrm{C^2}}{\mathrm{m^2}} = \mathrm{N}$.

Worked example 2: the compression of a bone

Problem. A bone of length $L_0$ and cross-sectional area $A$ supports a compressive force $F$. Its length decreases by $s = \frac{FL_0}{YA}$, where $Y$ is the Young’s modulus. Model a femur with $L_0 = 0.45\ \mathrm{m}$, $A = 5.0 \times 10^{-4}\ \mathrm{m^2}$, and $Y = 18\ \mathrm{GPa}$, supporting $F = 2.0\ \mathrm{kN}$. Find $s$ in micrometers.

Replacing the prefixes gives $F = 2.0 \times 10^{3}\ \mathrm{N}$ and $Y = 18 \times 10^{9}\ \mathrm{Pa} = 1.8 \times 10^{10}\ \mathrm{Pa}$. Work out the numerator and the denominator separately:

\[FL_0 = (2.0 \times 10^{3}\ \mathrm{N})(0.45\ \mathrm{m})\] \[FL_0 = 9.0 \times 10^{2}\ \mathrm{N\cdot m}\] \[YA = (1.8 \times 10^{10}\ \mathrm{Pa})(5.0 \times 10^{-4}\ \mathrm{m^2})\] \[YA = 9.0 \times 10^{6}\ \mathrm{N}\]

Your turn. Divide to find $s$ in meters, then convert it to micrometers. Before you check your answer, explain why rewriting $18 \times 10^{9}$ as $1.8 \times 10^{10}$ is allowed.

Solution to worked example 2 \[s = \frac{9.0 \times 10^{2}\ \mathrm{N\cdot m}}{9.0 \times 10^{6}\ \mathrm{N}} = 1.0 \times 10^{-4}\ \mathrm{m}\]

A micrometer is $10^{-6}\ \mathrm{m}$, so divide by $10^{-6}$ to get $s = 1.0 \times 10^{2}\ \mu\mathrm{m} = 100\ \mu\mathrm{m}$.

Rewriting $18 \times 10^{9}$ as $1.8 \times 10^{10}$ divides the leading number by 10 and multiplies the power of ten by 10. Together these multiply the number by $\frac{10}{10} = 1$, so its value does not change.

Check: typing 2.0E3 × 0.45 ÷ (18E9 × 5.0E-4) gives $1.0 \times 10^{-4}$. Without the parentheses, the calculator gives $2.5 \times 10^{-11}$. The units are $\frac{\mathrm{N\cdot m}}{\mathrm{N}} = \mathrm{m}$.

Worked example 3: the Reynolds number of a bacterium

Problem. The Reynolds number $\mathrm{Re} = \frac{\rho v L}{\eta}$ is a dimensionless number that describes motion through a fluid. An E. coli bacterium of diameter $L = 0.80\ \mu\mathrm{m}$ swims at $v = 20\ \mu\mathrm{m/s}$ through water with density $\rho = 1000\ \mathrm{kg/m^3}$ and viscosity $\eta = 1.0 \times 10^{-3}\ \mathrm{Pa\cdot s}$. Estimate the order of magnitude of $\mathrm{Re}$, then calculate it.

Try it yourself before opening the solution.

Solution to worked example 3

In SI units, $\rho = 1.0 \times 10^{3}\ \mathrm{kg/m^3}$, $v = 2.0 \times 10^{-5}\ \mathrm{m/s}$, and $L = 8.0 \times 10^{-7}\ \mathrm{m}$. For the estimate, $\rho$ rounds to $10^{3}$, $v$ to $10^{-5}$, $L$ to $10^{-6}$, and $\eta$ to $10^{-3}$:

\[\mathrm{Re} \approx \frac{(10^{3})(10^{-5})(10^{-6})}{10^{-3}} = 10^{-5}\]

For the calculation, the leading numbers give $\frac{(1.0)(2.0)(8.0)}{1.0} = 16$, and the exponents give $3 - 5 - 7 - (-3) = -6$:

\[\mathrm{Re} = 16 \times 10^{-6} = 1.6 \times 10^{-5}\]

Check: the result agrees with the estimate to within a factor of 2. The units cancel completely, so $\mathrm{Re}$ has no units, which is correct for a dimensionless number:

\[\frac{(\mathrm{kg/m^3})(\mathrm{m/s})(\mathrm{m})}{\mathrm{kg/(m\cdot s)}} = 1\]

Common issues

  1. Adding exponents when adding numbers. $10^{2} + 10^{2} = 2 \times 10^{2}$, not $10^{4}$. Check this by writing out $100 + 100 = 200$.
  2. Converting a prefix in the wrong direction. $2.5\ \mathrm{mm} = 2.5 \times 10^{-3}\ \mathrm{m}$, not $2.5 \times 10^{3}\ \mathrm{m}$. Check this with $1000\ \mathrm{mm}$, which is $1\ \mathrm{m}$, not $10^{6}\ \mathrm{m}$.
  3. Subtracting a negative exponent. $\frac{10^{4}}{10^{-5}} = 10^{4-(-5)} = 10^{9}$, not $10^{-1}$. Check this with smaller numbers: $\frac{10^{2}}{10^{-1}} = \frac{100}{0.1} = 1000 = 10^{3}$.
  4. Typing 10E for a power of ten. 10E-5 means $10 \times 10^{-5} = 10^{-4}$. Check this by typing 10E3, which gives 10000.
  5. Leaving the parentheses off a denominator. $\frac{12}{2 \times 3} = 2$, but typing 12 ÷ 2 × 3 gives 18. Check this on your own calculator.
  6. Using the wrong angle mode. In radian mode, sin(30) gives $-0.988$, not $0.500$. In degree mode, cos(2.0) gives $0.999$, but the cosine of 2.0 radians is $-0.416$. Check the mode with sin(90), which gives 1 only in degree mode.

Practice and the mastery check

Open the Math Toolkit module in your course’s Canvas site. There are three quizzes for N1, and you can retake any of them as often as you like:

  • Entry check. The two questions above with feedback.
  • Practice set. Questions ranging from plain numbers to physics, with feedback on every answer.
  • Mastery check. Five questions. A passing score is 6 of 7 points. The interpretation and application questions are worth 2 points each, so you need both. If you miss twice in a row, stop and work through the lesson section linked in the feedback, or bring the question to office hours.

Go deeper

These OpenStax sections cover the same skills with more practice: